High thermal conductivity potting adhesive
JS-1184HT additive silicone sealant for electronic appliances is mainly used for sealing various automotive electronics, power supplies, household electronics, and industrial electronic appliances. It plays a role in waterproofing, heat conduction, flame retardancy, and collision prevention.
Product features
1. Excellent electrical insulation performance.
2. Good thermal conductivity, with a thermal conductivity coefficient of 2.8-3.5W · m-1 · K-1.
3. Flame retardant grade: V-0.
4. The shrinkage of the product is small after curing.
| 产品型号 |
JS-1184HT（2.8W） |
JS-1184HT（3.5W） |
测试方法 |
|
固化前 |
|||
|
外 观 |
A: 白色 B：灰色 |
A: 白色 B：红色 |
/ |
|
A组分粘度60rpm （cps） |
7000 |
7100 |
GB/T 10247 |
|
B组分粘度60rpm （cps） |
12000 |
13000 |
GB/T 10247 |
|
A组分：B组分（重量比） |
1:1 |
1:1 |
/ |
|
密度（g/cm3） |
A：2.97 B:2.97 |
A：3.06 B:3.06 |
GB/T 13354 |
|
可操作时间 （h/25℃） |
2 |
3 |
GB/T 7123.1-2015 |
|
固化时间 （h/25℃） |
24 |
24 |
/ |
|
固化时间（h/80℃） |
0.5 |
0.5 |
|
|
完全固化时间 （h/120℃） |
3 |
3 |
/ |
|
固化后 |
|||
|
外观 |
灰色 |
粉红色 |
/ |
|
密度（g/cm3） |
2.97 |
3.06 |
GB/T 4472 |
|
完全固化后硬度(邵A) |
60 |
58 |
GB/T 531-2008 |
|
导热系数[ W·m-1·K-1）] |
2.84 |
3.65 |
IS0 22007-2 |
|
击穿电压（kV/mm） |
18 |
18 |
GB/T 1695 |
|
体积电阻率（Ω·cm） |
2×1014 |
4×1014 |
GB/T 1692 |
|
阻燃性能 |
V-0 |
V-0 |
UL94 |
- instructions
- 1. Clean the dust, oil, etc. on the sealing surface before use.
- 2. Before mixing, first mix components A and B thoroughly in their respective containers.
- 3. When mixing, the weight ratio of component A: component B=1:1 should be followed.
- 4. Mixing component A and component B can be done manually or mechanically, stirring evenly. High speed and prolonged stirring should be avoided to prevent shortened operation time and accelerated solidification.
- 5. It is best to vacuum defoaming before use.
- matters needing attention
- 1. The rubber material should be stored in a sealed manner, and the mixed rubber material should be used up at once to avoid waste.
- 2. This product belongs to non hazardous materials, but do not enter or eye contact.
- 3. After long-term storage, the filler in the adhesive may settle. Please stir evenly before use, as it will not affect the performance.
- 4. Contact of the adhesive with the following chemical substances will cause the adhesive to not solidify: N, P, S organic compounds; Sn, Pb, Hg, As plasma compounds; Containing alkynes and multi vinyl compounds.
- Hazard indications, safety recommendations, transportation rules
- 1. Wear protective gloves for long-term or repeated contact.
- 2. Keep away from ignition sources, sparks, and open flames, keep the container sealed, and use explosion-proof electrical, ventilation, and lighting equipment.
- 3. This product belongs to non hazardous materials and can be transported as non hazardous materials.
This product is packaged in 1kg and 5kg packages
The product is in a sealed, cool, and dry condition, with a storage period of 6 months. After expiration, it can be tested and qualified for normal use.